Radio Shack 43-3905 - Manual (Page 6)

6
at your local RadioShack store), or have the telephone company
update the wiring for you. You must use compatible modular jacks
that are compliant with Part 68 of FCC Rules and the requirements
adopted by the ACTA. The telephone cord and modular plug
provided is Part 68 compliant for connecting to the telephone
company network.
3
Set Phone Options
Phone Settings
1. Hold down both UP and DOWN for about four seconds
until ENTER LANGUAGE, then ENG ESP FRA appear, with
ENG
flashing.
2. Press UP or DOWN to select the desired language, then
press DELETE to confirm. LCD CONTRAST and 1 2 3 4 5
appear on the display, with 3 flashing.
3. Press UP or DOWN to select the contrast level (1-5), and
press DELETE to confirm. ENTER AREA CODE appears, then
_ _ _ appears, with the first _ flashing.
4. Press UP or DOWN to select the first number of the area
code, and press DELETE to confirm the selection. The
flashing _ goes to the next digit.
5. Repeat step 4 to set the second and third digits.
Ringer
If you do not want to hear the phone ring, slide RINGER to
OFF. You can still make calls with the ringer off, and you can still
answer calls if you hear another phone on the same line ring. If
you want to hear the phone ring, set RINGER to HI or LO.