Ruckus Wireless MF2501 - Manual (Page 17)

8000003, December 2005 MediaFlex 2501 Multimedia Wireless Adapter User’s Guide 17
Accessing the Web Interface
You should now be able to find the default SSID “V54” of your MF2501 Adapter over your wireless
connection:
Accessing the Web Interface
The MF2501 Adapter provides a Web-based user interface for configuration and monitoring. For
information about using the Ruckus Wireless Web Interface, refer to
Chapter 3:, “Using the Ruckus Wireless
Web Interface .
1. To access the Ruckus Wireless Web Interface, launch a Web browser and enter the MF2501 Adapter’s IP
address. If this is the first time the access point is being configured, enter the default IP address:
192.168.0.254
2. A logon screen will appear. Use the default logon information:
Username: admin
Password: <blank>
After logging in, you will see the main information page. On the information page, there are two panes. The
pane on the left shows major information or configuration points. Each major information or configuration
area has a number of sub-menus. Clicking on the relevant menu will bring the relevant page onto the screen.
The system monitors the activities on the Web user interface. If you do not use the Web interface for more
than five minutes, the system will time out, and you will be logged out automatically. You need to re-log in
to access the interface.
!
CAUTION:—Any configuration changes will be lost unless you use the Update button. It is recommended
that after each configuration screen you modify, you click the Update button.
Table 4—Default Wireless Settings
Wireless Feature Setting
Network Name (SSID) V54
Security Disabled