Ruckus Wireless MF2501 - Manual (Page 24)

24 MediaFlex 2501 Multimedia Wireless Adapter User’s Guide 8000003, December 2005
Configuring the MF2501 Adapter
Configuring the MF2501 Adapter
This section describes the tasks and screens used to customize the MF2501 Adapter configuration to run on
your wireless network.
Review the following topics before you change any system configuration settings:
• "Connecting to the MF2501 Adapter" on page 15
• "Accessing the Web Interface" on page 17.
System Configuration
Table 6, “MF2501 Adapter Default and User Settings Worksheet,” on page 21 shows the default settings
used to login to the device.
A minimum set of configurations is required to put the MF2501 Adapter into operational mode. The system
provides the default settings for these configuration items. You should change the default settings where
necessary to match your own wireless network’s configuration, and to protect your privacy.
A system reboot is required for configuration changes to take effect. Follow the following steps to configure
the MF2501 Adapter:
1. Connect to the MF2501 adapter by following the instructions in "Connecting to the MF2501 Adapter" on
page 15 .
2. Choose Configuration->System.. The window of Figure 5 appears.
Figure 5—System Configuration