Ruckus Wireless MF2501 - Manual (Page 29)

8000003, December 2005 MediaFlex 2501 Multimedia Wireless Adapter User’s Guide 29
Configuring the MF2501 Adapter
Table 10 shows the Advanced Wireless Configuration parameters.
Table 10—Advanced Wireless Configuration Parameters
Field Description
Wireless Mode Sets the wireless mode for the MF2501 Adapter. The wireless mode
determines the wireless speed of devices that are allowed to associate to
the MF2501 Adapter. Options are:
• 802.11g&b: stations running at either 802.11g (2.4GHz, 54Mbps)
or 802.11b (2.4GHz 11Mbps) can associate to the MF2501
Adapter. This is the default setting.
• 2.4GHz 54Mbps (802.11g only)
• 2.4GHz Auto 108Mbps (802.11g Turbo)
• 2.4GHz Only 108Mbps (802.11g Turbo)
!
CAUTION:—Using Turbo and/or super G mode is NOT supported
when running video streams. These modes are intended for
diagnostic and for networks where only non-video traffic is
transmitted.
Super G This check box is used to enable the Super G mode, which engages
advanced mechanisms when extra bandwidth is available and or required.
By default, this option is not checked.
Data Rate Select the desired data rate from the drop-down menu. The default is
Best, which means the system will adjust the data rate automatically.
Transmit Power Select the desired Adapter transmit power from the drop-down menu. In
cases where you might want to limit your signal coverage range, such as
in a small apartment or room, you can select a lower transmit power.
The options are:
• Full
• Half (-3 dB)
• Quarter (-6 dB)
• Eighth (-9 dB)
• Minimum
The default is Full.