Setting up the audio options, D v d o – RCA B27TF685 User Manual
Page 54
52
C
HAPTER
T
HREE
: DVD O
PERATION
D V D O
P E R AT I O N
Setting up the Audio Options
• Digital output
PCM: Converts to PCM(2CH) 48kHz/16Bit audio. Select PCM when using the Analog Audio
Outputs.
Bitstream: Converts to Dolby Digital BITSTREAM - 5.1CH (if MPEG-2, 7.1CH). Select BITSTREAM
when using the Digital Audio Output.
• DTS
On: Outputs DTS BITSTREAM via digital output only. Select DTS when connecting to a DTS
DECODER.
Off: Doesn’t output digital signal.
• Dynamic Compression
On: To select dynamic compression.
Off: To select the standard range.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade-
marks of Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories Inc.
All rights reserved.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
3
Press the DOWN arrow
button to select the desired
item, then press the RIGHT
arrow button.
4
Press the RETURN button
to exit.
1
Press the DVD SETUP
button (The SETUP MENU
is displayed).
2
Press the DOWN arrow
button to select “Audio
Options”. Press the ENTER
button.
16061510-CHAPTER 3 12/13/02 11:47 AM Page 52