RCA B27TF685 - Manual (Page 72)

70 C HAPTER F IVE : T ROUBLESHOOTING
T R O U B L E S H O O T I N G
Possible Solution
Ensure that the disc is installed with the label side facing up.
Check the region number of the DVD.
This player cannot play CD-ROMs, DVD-ROMs, CD-R, etc. Insert a DVD,
a VIDEO-CD or a CD.
5.1 channel sound is reproduced only when the following conditions
are met. :
1) The disc is recorded with 5.1 channel sound (check marking on the
outside).
• Check if your audio system is connected and working properly.
2) The DVD player is connected with the proper amplifier.
The features or action cannot be completed at this time because :
1) The DVD’s software restricts it.
2) The DVD’s software doesn’t support the feature (e.g., angles).
3) The feature is not available at the moment.
4) You’ve requested a title or chapter number or search time that is
out of range.
Check if the disc has a Menu.
Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
The Screen Ratio is fixed on your DVD discs.
Make sure you have selected the correct audio in the Audio Options
Menu.
Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
If the problem still cannot be solved, please contact your nearest
authorized service center.
Problem
Disc does not play.
5.1 channel sound is not being
reproduced.
The icon appears on screen.
Disc Menu doesn’t appear.
Playback mode differs from the
Setup Menu selection.
The screen ratio can not be
changed.
No audio.
If you experience other
problems.
Identifying DVD Problems
16061510-CHAPTER 5 12/13/02 12:17 PM Page 70