Roberts Radio SOUND66 - Manual (Page 14)

13
Dynamic Range Control (DRC) - DAB
Dynamic range control (also known as DRC) can make quieter sounds
easier to hear when your sound system is used in a noisy environment.
There are three levels of compression:
DRC 0 No compression applied. (default)
DRC 1 Maximum compression applied.
DRC 1/2 Medium compression applied.
1. Press the On / Standby button to switch on your sound system.
2. Press the DAB button to select the DAB band.
3. Press and release the Menu button the display will show “EQ.”
4. Press the Tuning Up or Down buttons until "DRC VAL" appears on
the display. Then press the Select button. The display will show the
current DRC value.
5. Press the Tuning Up or Down buttons to select the required DRC setting
(default is 0) .
6. Press and release the Select button to confi rm the setting. The display
will return to the normal radio display.
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the sound
system will have no effect.
2
3
4,5
4,6
4,5