Roberts Radio SOUND66 - Manual (Page 21)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Navigating your iPod
Please note: Some of the iPod control functions are only available using
the remote control or via the iPod's own controls. Not all iPods support
remote menu navigation (for example, iPod nano 6th generation).
1. Use the Menu button to navigate to higher level menus on your iPod.
2. Use the Tuning Up or Down buttons as required to move up or down
a menu screen on your iPod.
3. Press the Select button to choose the highlighted on screen menu
item. If this item is a lower level menu item, you may then navigate
further using the Tuning Up or Down and Select buttons.
Playing a fi le on your iPod
1. When you have found the required item use the Play / Pause button
on the sound system to start the iPod playing. If you have just docked
your iPod, you may need to press the button more than once to ensure
that the sound system is in communication with your iPod.
2. Adjust the volume to the required setting using the Volume Up and
Down buttons on your sound system.
3. To pause playback press the Play / Pause button. To resume playback
press the Play / Pause button again.
4. iPods do not have a Stop button (they use the Pause function). To play
an alternative selection, use the iPod menus to make the selection using
the Play / Pause button to stop playing the current item if needed.
1-4
20
1
2,3
2,3 3