Roberts Radio SOUND66 - Manual (Page 25)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
24
16. Press the Select button to enter the alarm month setting. The alarm
day will fl ash on the display.
17. Press the Tuning Up or Down buttons to choose the alarm day.
18. Press the Select button to enter the setting. The alarm source option
will fl ash on the display.
19. Repeatedly press the Tuning Up or Down buttons to choose the
desired alarm source (DAB, FM, iPod, BUZ).
20. Press the Select button to confi rm the alarm settings and return to
normal radio mode.
Radio, Buzzer and iPod alarms are indicated in the display by the
symbol and the corresponding alarm number.
When your sound system is set to wake by the radio alarm, your sound
system will switch to the last used DAB or FM radio station.
When the alarm activates the alarm will start softly and gradually increase
in level.
For DAB, FM or iPod alarm you may adjust the volume while the alarm
is active. Without intervention the volume will gradually increase up to a
mid level.
Important: If using your iPod as the source for the alarm, then be sure to
dock your iPod. After docking, briefl y switch on the sound system using the
On / Standby button and then select iPod mode using the iPod button.
Next, press the Play / Pause button two or three times to ensure that
the sound system and your iPod are communicating correctly. Failure to
verify this may result in the alarm not being audible if the sound system
is unable to activate your iPod when needed. When ready, put the sound
system back into standby mode using the On / Standby button.
17,19
16,18
17,19
20