Roland TD-20 - Manual (Page 6)

SMARTRIGGER USERS GUIDE
Version 1.4
2/10/2010
©2004 All Rights Reserved. http://www.smartrigger.com
Proper Cymbal Mounting
Smartrigger cymbals are designed to be mounted on any standard cymbal stand or mounting
arm.
Most stock cymbal stands come with a 6mm or 8m threaded mounting rod, a series of washers
and a wing-nut. You Smartrigger cymbal should be mounted between the two felt washers that
come with almost all cymbals stands. If you need additional cymbal hardware, any drum shop
or music store will have these in stock as they are considered replacement accessories and
should be replaced when they are worn out.
Gibraltar cymbal arms are very good for acoustic and Smartrigger electronic cymbals as they
come standard with a nice ‘T’ shaped black plastic cymbal sleeve. Alternatively, you can
always use Aquarian Cymbal Springs or other mounting systems with a standard 1/2” bore.