Roland TD-20 - Manual (Page 8)

SMARTRIGGER USERS GUIDE
Version 1.4
2/10/2010
©2004 All Rights Reserved. http://www.smartrigger.com
Hi Hat Clutch Mounting
Regardless of which type of hi hat stand you choose, you will mount the top hi hat cymbal onto
your hi hat clutch. Almost all hi hat arms and stands come with a clutch. You can use any
clutch you like including a “drop clutch”.
Clutch with Standard Felt Washers
Installing the Hi Hat Cable
A stereo cable with one straight ends and one right angle end should be used for the hi hat
connection to your drum module. Follow these steps to install the hi hat cable:
1. Place the hi hat bottom cymbal on your hi hat stand or hi hat arm.
2. Install your hi hat top cymbal and clutch.
3. Connect one end of the cable to the hi hat input on your module.
4. Pass the cable through one of the holes in the bottom hi hat cymbal.
5. Plug the other end into to one of the two jacks in the trigger housing of the top
cymbal. The jack on the trigger housing should leave enough clearance for the cable
to pass by the hi hat’s mounting rod.
6. Carefully place the top hi hat with installed clutch onto your hi hat stand.