Roland JUNO-Gi - Manual (Page 24)

24
Mastering Your Song
You can optimize the level (volume) of your song by mastering it . You can also convert the mastered data to an audio fi le (WAV) .
In mastering mode, you can listen to the playback of all eight tracks while mixing them down and recording the mix in stereo on a separate pair
of V-tracks .
1 2 3 4 5 6 7 8 1
V-Track 1
V-Track 2
2 3 4 5 6 7 8
Track 1–8 Stereo Track
* First turn off the [AUDIO INPUT] and [KEYBOARD] buttons .
Selecting Mastering mode
1. Press the [RECORDER VIEW] button so it’s lit .
2. In the RECORDER screen, press the [1] (MODE) button a number of times to choose Mastering mode .
Mode indication (use the [1] (MODE) button to change)
(none)
Normal recording mode
BOUNCE Bounce mode
MASTERING Mastering mode
Selecting the recording tracks
3. Use the cursor buttons to move the cursor to the “Target Track” fi eld, and use the VALUE dial to specify the
mastering-destination tracks and V-tracks as “Target Track:1/2” and “V-Track: 2” (V-track 2 of tracks 1 and 2) .
MEMO
If the V-track contains data, a ■ symbol is shown beside the V-track fi eld .
4. In the RECORDER screen, press the [6] (EFFECT) button .
The mastering toolkit selection screen will appear .
5. Use the cursor buttons and the VALUE dial to select the mastering toolkit patch “PRST: 02 Mix Down .”
6. Press the [EXIT] button to return to the RECORDER screen .
10