RCA Pro809 - Manual (Page 30)

Powering Your Camcorder
(continued)
22
Cautions: The 1CVA356 is designed to be used only with vehicles having negative
ground electrical systems.
Do not use any other car cord. It may damage your camcorder.
CHARGE
Cigarette Lighter Socket
POWER CHARGE
DC OUT 7.5V 1.6A
AC POWER ADAPTER AA-EIN
Optional 1CVA356
Car Adapter/Charger
Indicator
Using the Optional Thomson Car Cord Adapter/Charger
The optional 1CVA356 car cord adapter/charger allows you to power your camcorder
from the cigarette lighter socket of a car, truck, or RV. It converts 24- and 12-volts to a
6-volt output. The 1CVA356 can also charge the battery that came with your
camcorder and the (long play) batteries.
Notes: Consult instructions enclosed with the 1CVA356 for details.
The vehicle’s engine does not have to be running when using the car cord.
Optional accessories are shown on pages 2-4.
Use 1CVA356 Car Cord Adapter/Charger to Charge a Battery
1. If the power connector’s plug is
attached to adapter/charger, remove it.
2. Attach the battery as shown.
3. The CHARGE indicator will light while
the battery is being charged. When the
CHARGE indicator turns off, the
battery is charged.