RCA Pro809 - Manual (Page 49)

41
FADE
B.LIGHT
EDIT– D•S•E EDIT+
A/M FOCUS
AUTO
A/V IN
OU
BATT EJECT
TE/
TIME
NORMAL TITLE
ON/OFF
OSD
VCR REC
SCENE SELECT
SET ON/OFF DATE/
TIME
NORMAL
TITLE
RESET Z/MEMORY OSD
CHAR– CHAR+ SET ON/OFF
–
0:00:00
Time Counter
In Viewfinder
Minutes
Seconds Hours
Time Counter
The time counter shows actual time elapsed when recording or playing back a
tape. It helps you quickly locate the end of recorded segments.
55 /EDIT –
DATE/TIME/NORMAL/TITLE in NORMAL
RESET
/B.LIGHT
OSD
Z (Zero)/MEMORY
To Use Time Counter
1. Place CAMERA/OFF/VCR in VCR.
2. Place DATE/TIME/NORMAL/TITLE in
NORMAL.
3. Press OSD (DISPLAY on remote) to
display the time counter in the
viewfinder.
4. Insert the cassette, and press
55 /EDIT – ( 55 REW/SCAN on remote)
to rewind the tape.
5. Press RESET to reset the time counter
to 0:00:00.
6. Press 66 /EDIT + ( 66 F.FWD/SCAN
on remote) and fast forward the tape
until the time counter reads the amount
of time of your recorded segment. For
example, 0:10:00 will appear for ten
minutes.
7. Press /B.LIGHT (STOP on remote)
to stop the tape. This is the
approximate end of your recording.
8. Press OSD to remove the time counter
from the viewfinder.
Notes: If you rewind the tape farther back
than a counter reading of “0:00:00”, a minus
will appear in front of the counter.
The time counter is automatically reset to
“0:00:00” each time a cassette is inserted.
66 /EDIT +
It will not be recorded on the tape.
CAMERA/OFF/
VCR Switch
(Located on
Other Side)
W W
T T
PAUSE
F.FWD
PLAY
REW
SCAN
STOP
VCR REC TITLE
STANDBY
CAMERA
RECORD
ON/OFF
DISPLAY
ZOOM
DISPLAY
66 F.FWD/SCAN
55 REW/
SCAN
STOP