Raymarine S1000 - Manual (Page 15)

S1000 Autopilot Installation Guide 13
Po rt Po rt
B
re c S d e e l
r i o v r e e s R w
Po rt Po rt
B
re c S d e e l
r i o v r e e s R w
Bleed procedure, sheet 2
D7339-2
4. SLOWLY turn the wheel counter-clockwise and observe
the bubbles in the transparent tube. Keep the helm
pump reservoir topped up while doing this. Keep
turning the wheel counter-clockwise until there are no
more bubbles i.e. so the hydraulic fluid in the
transparent tube is clear.
3.
Using a suitable screwdriver, turn the
autopilot pump shaft so that the flat on the
shaft is toward the PORT side of the pump.
87040_5.book Page 13 Monday, April 30, 2007 5:58 PM