RTS TBX - TriBus ADAM - Manual (Page 17)

13
Debug Information
The Debug Information menu item, shown in Figure 32, allows you to send a flash file to RTS to help troubleshoot the reason
for crash in AZedit. In the event of a processor crash, the processor saves diagnostic information about the cause of the
problem to its flash memory. The menu item stays greyed-out until a flash file is created when the processor crashes.
NOTE: Every card in every frames stores its own debug information. So, if frame 3 has a processor crash, you must
connect AZedit to frame three to create a .azd file to send to RTS for debugging.
To create the debug file, do the following:
NOTE: Once the processor has crashed the Upload Debug Information menu item becomes active.
FIGURE 32. Upload Debug Information