Ricoh AFICIO COLOR 6010 - Manual (Page 240)

224
35mm Strip Negative
1
Press the [Shading] key.
2
Insert the “N” (Negative) filter in the left slot as
shown in the illustration.
Note
❐ Be careful to insert the filter as shown, not the other
way around.
❐ Before going to the next step, make sure that the
fresnel lens is lowered in position.
3
Set the base film in the holder.
Reference
Regarding setting the base film, ☛ see page 217.
4
Open the film cover and while pressing the holder
lever to the left, insert film strip holder the right
slot.
5
Insert the holder until the ★ mark is placed as
shown in the illustration.
6
Press the [Shading] key.
Note
❐ The machine will start shading automatically.
TRSR0F0E
1
1: Filter
1: Holder lever
TRSR0J0E
1
Selecting the Film Type and Performing Shading