Ricoh AFICIO COLOR 6010 - Manual (Page 50)

34
Setting Originals of Different Sizes in the Document Feeder
You can insert a stack of originals of different standard sizes (e.g. A4, B5 etc.) into the document feeder. These
originals are individually fed onto and removed from the exposure glass (platen glass).
Preparation
To use this function, you have to select ADF Mixed Sizes mode with the user tools. ☛ See page 198.
Limitation
❐ The weight of originals that can be set with this function is 52 - 81g/m 2 , 14 - 20 lb.
❐ Smaller size originals might be skewed a little.
Note
❐ If your stack of originals contains pages of different sizes, make sure that:
•
Longer originals are at the bottom of the stack, and shorter originals are at the top.
• All originals are flush with the back fence of the document feeder.
1
Align the rear and left edges of the originals as
shown in the illustration.
2
Adjust the guide to the widest original size.
3
Set the aligned originals face up into the docu-
ment feeder.
Setting Originals of Different Sizes in the Document Feeder
1: Set into the document feeder
2: Vertical size