Adjusting color, density and focus, Color tones in film scanning, Density adjustment – Ricoh AFICIO COLOR 6010 User Manual

Page 244

Advertising
background image

228

Adjusting Color, Density and Focus

Adjusting Color, Density and Focus

After shading, you can adjust the color tone, image density, or manual focusing.

Note

When setting the glass mount film holder, manual focus adjustment is required.

You can adjust the focus manually for 35mm film only.

Color Tones in Film Scanning

Use these modes when you want to adjust the overall color tone of copies. Also use these modes when you
use negative film, because the color tone of copies varies with the film brand. You can adjust the tone of
copies by adjusting Cyan, Magenta, and Yellow (three basic colors).

Notes on color tone adjustments

If the color balance differs slightly from your image, you can also change the tones with the Color Adjustment (

See

page 229) or Color Balance Adjustment (

See page 124) function.

If dark parts are too black, change the U.C.R. Adjustment to level 3 (default = level 5).

See page 132.

Density Adjustment

Density can be set not only with this display, but also with Image Density Adjustment. However, when adjusting for the
projector, we recommend you adjust the image density with this display.

Advertising
This manual is related to the following products: