Rimage 110716-000 - Manual (Page 10)

Liberty Operator Panel
The Liberty printer operator panel has three buttons and four LEDs to indicate certain
conditions.
1 – Cancel Button 3 – Disc Button and LED
2 – Ink Cartridge Status LED 4 – Power Button and LED
Cancel Button: Not used.
Ink Cartridge Status LED: Flashes when an ink cartridge is low on ink, incorrectly
installed, or when the printer cover is open. To check the ink cartridge status, refer to
“ Ink Cartridge Status ” on page 11.
Disc Button and LED: The Disc button is used to move the tray in and out, and to
load a disc for manual printing used in checking alignments. The Disc LED illuminates
when a disc is on the tray.
Power Button and LED: The Power button is unused. The green Power LED is only
on when the Tray Controller is running and there is power to the printer. See Tray
Controller on page 27 . The Power LED flashes when the printer is printing or in an
error state. Error conditions can be viewed at the Production Server, or in the status
field located inside the printer driver under the advanced tab.
10