Rimage 110716-000 - Manual (Page 14)

11. When prompted, press the Disc button to print the following test pattern on a disc.
12. The black and magenta lines should be straight as shown above. If they are not inline with
each other, repeat the alignment process starting at step 5.
13. Close the Align Cartridges window.
14. Close the Printing Preference window.
15. Press the Disc button to close the printer tray. If the printer tray does not close, close the
tray controller application and open it again. Wait for the tray controller to initialize,
about 60 seconds, and press the Disc button to close the tray.
14