ROTEL RLC-1080 - Manual (Page 4)

4 RLC-1080 Power Conditioner
About Rotel
A family whose passionate interest in music led
them to manufacture high fidelity components
of uncompromising quality founded Rotel over
45 years ago. Over the years that passion has
remained undiminished and the goal of provid-
ing exceptional value for audiophiles and music
lovers regardless of their budget, is shared by
all Rotel employees.
Rotel’s reputation for excellence has been earned
through hundreds of good reviews and awards
from the most respected reviewers in the industry,
who listen to music every day. Their comments
keep the company true to its goal – the pursuit
of equipment that is musical, reliable and af-
fordable.
All of us at Rotel thank you for buying this
product and hope it will bring you many hours
of enjoyment.
Getting Started
Thank you for purchasing the Rotel RLC-1080
Power Conditioner. When used in a high-quality
music or home theater system, your Rotel power
conditioner will protect your high performance
audio and video components from damaging
power surges, spikes and lightning, as well as
power outages. Protection is guaranteed. Isolated
noise filter banks and automatic voltage regula-
tion will eliminate power as a source of audio
and video signal degradation. Pure sine wave
battery backup power will prevent interruptions,
lost pre-sets, missed DVR recordings and lost
media server data when the power goes out.
Data-line surge protection jacks will stop surges
traveling over phone or data lines.
Digital satellite system, cable modem, and
CATV coaxial cable lines are equally protected.
With the RLC-1080 you can enjoy your home
theater experience with the peace of mind that
performance is optimized and protection is
guaranteed.
Contents
Important Safety Information ................. 2
Front and Rear Panel Controls and Connections 3
About Rotel ........................................... 4
Getting Started ...................................... 4
Features 5
Parts List 5
A Few Precautions ................................. 5
Power Capacity 5
Placement 5
Front Panel ............................................ 6
ON BATTERY Status Indicator 1 6
DELAYED 1 Status Indicator 2 6
DELAYED 2 Status Indicator 3 6
REGULATING Status Indicator 4 6
Vacuum Fluorescent Display 5 6
OVERLOAD Status Indicator 6 6
FILTERING Status Indicator 7 6
LINE OK Status Indicator 8 6
LOW BATTERY Status Indicator 9 6
STATUS Button 0 6
SETUP Button - 6
On/Off Switch = 6
Up and Down Arrow Buttons qw 6
Removable Support Feet e 6
Rear Panel ............................................. 7
AC-Power Outlets r 7
EXTERNAL BATTERY Connector t 7
Cooling Fan y 7
Surge Protected COAX/RF Connectors u 7
CIRCUIT BREAKER i 7
SYSTEM GROUND Screw o 7
DATA PORT Jack (USB) p 7
Surge Protected Telephone Jacks [ 7
ETHERNET Surge Protected Jacks ] 7
DC TRIGGER Jacks \ 7
Input Power Connector a 7
BUILDING WIRING FAULT Indicator s 7
Installation ............................................ 8
Placement 8
Rack Mounting 8
Connecting the Battery ........................... 8
System Test ........................................... 8
Status Screens ....................................... 9
Status Screens 9
INPUT VOLTAGE: XXXV OUTPUT VOLTAGE: XXXV 9
SYSTEM LOAD: <XXXWLOAD: <XXX% 9
EST. RUNTIME: XHRS FUEL: XXX% 9
Information Screens ............................... 9
SOURCE: XXXXXXX EST. RUNTIME: XHRS Screen 9
Firmware Version: XXXXXXX Screen 9
Model Number and Serial Number Screen 10
Internet Address Screen 10
INPUT FREQUENCY; OUTPUT FREQUENCY Screen 10
Connecting the Components .................. 10
Setting Up the RLC-1080 ..................... 10
AUDIBLE ALARM Setting 10
SENSITIVITY Setting 10
DISPLAY DIMMER Setting 11
LED DIMMER Setting 11
GO TO BATTERY IF > XXXV Setting 11
GO TO BATTERY IF < XXXV Setting 11
OUTLET DELAY1 and OUTLET DELAY2 Setting 11
LOWBATTWARNING: XMIN Setting 11
BATREPDATE: XX/XX/XX Setting 11
DO QUIK SELFTEST Screen 11
DO RUNTIME CAL Screen 12
DISPLY-BEEP TEST Screen 12
SCREEN SAVER: ON/OFF Screen 12
RESET TO DEFAULT: YES/NO Setting 12
Setting Default Screen 12
Troubleshooting .................................... 12
The RLC-1080 will not turn on 12
Connected equipment reboots or turns off
when the RLC-1080 switches to battery power. 13
Replace Battery LED is illuminated. 13
Limited Warranty ................................. 13
Specifications ....................................... 14