1 – introduction, About the fishfinder 465, Introduction – Raymarine 465 User Manual
Page 12: Fig. 1-1, Typical installation
1
Introduction
Fig. 1-1
Typical Installation
1 – Introduction
About the FishFinder 465
The FishFinder 465 is a system that uses sound waves (“sonar”) to
detect fish and show the bottom of a lake or sea. The system includes a
transducer and a display unit, connected by a cable. The transducer
sends high-frequency sound waves down into the water. These sounds
strike fish, the bottom, or other objects in the water, and return as
echoes. The FishFinder then interprets these echoes and presents a
display.
The FishFinder 465 can handle many different jobs:
•
detect the presence of fish below the boat
•
trigger an alarm when fish are found
•
measure the depth of the water
•
set alarms for minimum and maximum depth
•
show the shape of the bottom
•
determine whether the seabed is hard or soft
•
measure the speed of the boat and the distance traveled
•
show the water temperature
We are sure you will find the FishFinder 465 to be one of the most useful
devices on your boat.
FishFinder 465
Display Unit
Optional Thru Hull
Transducer
Transducer mounted
in quick release
transom bracket
PWR
SETUP
CLEAR
465
ZOOM
BOT
LOCK
A-SCP
F I S H F I N D E R