Raymarine 465 - Manual (Page 37)

26 Operating Instructions
Page Control
Pad
Up and down arrows – ( and )
During setup – Use these controls to call up a choice or
move to the next line on a menu.
If the Zoom display is turned on – If the manual zoom
feature is turned on, these will move the zoom display up
or down.
Left and right arrows – (< and >)
During normal display – Use these buttons to go to the
next display.
During setup – Use these arrows to make a choice within a
line on the menu.
SETUP
To enter the Setup Menu – Press SETUP at any time.
To go to the System Setup Menu – Press this button
twice in all normal displays. If the sidelooker split screen
(Window Page options F, G, or H) is enabled, this button
must be pressed three times.
During setup – Once you make a change, press SETUP to
save the change and go back to the normal display.
CLEAR
During normal display – When an alarm is triggered,
use CLEAR to turn off the buzzer. (The alarm will continue
to be indicated on the display.)
During setup – Once you make a change, press CLEAR to
save the change and go back to the normal display.
When the unit is first turned on, it will present the normal FishFinder
Page. You can reach the Zoom, A-Scope and Bottom Lock Modes by
pressing buttons on the control panel. See Fig. 3-12.
ZOOM
The “Zoom” Mode shows a magnified view of a section of
the display area.
A-SCP
The “A-Scope” Mode shows a “real time” view of the area
directly under the transducer.