Radio Shack PRO-83 - Manual (Page 34)

Beyond the Basics 34
[
Repeatedly press or until the option you
want appears, then press E to select it.
Otherwise, press ./CLR if you do not want to
select it. Then skip to Step
^
.
\
Press E while S-S.Alt appears. One of the
following alert options appears.
ALt bEEP: The scanner beeps when a signal
stalker signal is detected.
ALt Light: The scanner flashes the display
backlight when a signal stalker signal is detected.
ALt bP-Lt: The scanner flashes the display
backlight and beeps when a signal stalker signal
is detected.
ALt OFF: The scanner does not provide any alert
when a signal stalker signal is detected.
]
Repeatedly press or until the option you
want appears, then press E to select it.
Otherwise, press ./CLR if you do not want to
select it.
^
When you select the option, press ./CLR to exit
the option mode. Otherwise, to continue normal
scanning, repeatedly press FUNC until
disappears then press SCAN.
F