RCA Pro942 - Manual (Page 16)

14
Powering Your Camcorder
Insert the Battery
1. Make sure the CAM/OFF/VCR switch
is in OFF.
2. Lift the OPEN lever and pull up the
battery compartment cover.
Using the Rechargeable Battery to Power Your Camcorder
OPEN Lever
Reference
Marks
3. Insert the battery into the battery
compartment aligning the reference
marks.
4. Press and hold the battery while
sliding it in the direction of the arrow.
Tabs
5. Close the battery compartment cover.
Hold the OPEN lever and align the
tabs on the cover with the tabs on the
compartment.
Remove the Battery
1. Make sure the CAM/OFF/VCR switch
is in OFF.
2. Lift the OPEN lever and pull up the
battery compartment cover.
3. Slide the battery in the direction of the
arrow until you hear a click.
4. Remove the battery from the
compartment
5. Close the battery compartment cover.
Hold the OPEN lever and align the
tabs on the cover with the tabs on the
compartment.
Notes: The OPEN lever must be open for
the cover to close.
Remove the battery from the camcorder
when not in use.