RCA Pro942 - Manual (Page 45)

43
DC IN
6V
OPEN
T
W INST. ZOOM
FOCUS
DATE/TITLE
DISPLAY
PLAY
F.F. EDIT SEARCH
STOP
REW
F
N
16X9
FADE EIS
Audio/Video Dubbing
1. Slide camcorder’s CAM/OFF/VCR
switch to VCR.
2. Insert the tape you want to dub on,
press PLAY, and locate a place on the
tape a few seconds before where you
want the dubbing to begin.
3. Place the camcorder in play pause
exactly where you want to begin
dubbing using the thumb trigger
(PAUSE/RECORD on remote).
4. Press and hold A/V DUB on remote,
and then press PLAY to place the
camcorder in AV dub pause. A/V
DUB
appears in viewfinder.
5. Place the tape you want to dub from in
the VCR, locate the beginning of the
part you want to dub, and place the
VCR in play pause.
6. Start the VCR playing and press the
thumb trigger (PAUSE/RECORD on
remote) to start dubbing.
disappears and A/V DUB remains
in viewfinder.
7. Press STOP when you want the
dubbing to stop.
Notes: If you want to stop dubbing at a
certain point on the tape, turn on the
camcorder’s memory-stop feature. Set the
time counter to “0:00:00M” at the point
where you want the dubbing to stop. The
camcorder will automatically stop dubbing
when it reaches “0:00:00M”
.
You can record new audio and video from the
camcorder’s built-in microphone and camera.
Remove the input cable from the camcorder.
Follow steps 1 through 4 above, and then
press thumb trigger (PAUSE/RECORD on
remote) to start dubbing. To stop dubbing,
press STOP.
The camcorder will automatically enter the
stop mode to prevent excessive tape wear if it
remains in dub pause for more than five
minutes.
To Audio/Video Dub on the Camcorder
CAM/OFF/VCR Switch
PLAY
Button
Thumb Trigger STOP
Button
PLAY Button
PAUSE/
RECORD
Button
STOP Button
A/V (Audio/
Video) DUB
Button
REW F.FWD
STOP PLAY
A/V DUB PAUSE
DISPLAY
RESET
TITLE
RECORD
T
W
ZOOM
ON
OFF
S.EDIT