RCA Pro942 - Manual (Page 31)

29
COLOR
TINT BRIGHT
FOCUS
EJECT
N
F
DATE/TITLE
DISPLAY PLAY
F.F.
STOP
REW
EDI T
SEA RC H
PUSH
16X9
FADE
EIS
Viewfinder
The camcorder’s viewfinder is a miniature monitor that displays the picture
seen by the lens.
Caution: When carrying the camcorder with
the shoulder strap, rotate the viewfinder down
to prevent possible damage to the viewfinder
from bumping against your body as you move.
Eyepiece
Focus
Control
Viewfinder
CAM/OFF/VCR Switch
Caution: Do not force the viewfinder to
rotate completely around. This will damage
the viewfinder and/or the camcorder.
Eyepiece Focus Control
The eyepiece focus control lets you set the focus of the viewfinder for your personal
vision. If you wear eyeglasses, you can probably operate the camcorder without them.
COLOR, TINT, and BRIGHT Controls
These small controls are set at the factory and should require no adjustment. If
adjustment is needed, use a small plastic screw driver to prevent damaging the
miniature controls.
1. Attach a power supply to the
camcorder. Press and hold the small
button on the CAM/OFF/VCR switch
while you slide it to CAM.
2. Adjust the eyepiece focus control for
your vision. Focus on one of the on-
180˚ Tilt
Tilt Adjustment
screen displays (such as the time
counter).
The eyepiece focus control does not
affect the focus of the picture actually
recorded by the camcorder.