Recording, Sub menu — tally light and jlip id no, Set the jlip id no – RCA ProV800C User Manual
Page 55
53
Recording
Tally
Interval Timer
Rec Time
OFF
JLIP ID NO.
0 7
ON
OFF
Sub Menu — Tally Light and JLIP ID NO.
4. Press
4
4 or 3
3 to turn the tally light
ON or OFF.
• Select ON to have the tally light
turn on during recording.
• Select OFF if you do not want the
tally light to light.
5. Press
5
5 to stop Tally flashing and
return to the recording menu, or press
MENU to exit both menus.
Set the JLIP ID NO.
The camcorder has a JLIP (Joint Level Interface Protocol) connector that may be
used in the future to connect a device, such as a home computer.
To Select a JLIP ID NO.
1. Follow steps 1-4 on the previous page.
2. Press
4
4 or 3
3 to highlight JLIP ID NO.
Tally
Interval Timer
Rec Time
OFF
JLIP ID NO.
0 7
ON
OFF
3. Press
6
6 to start JLIP ID NO. flashing.
4. Press
4
4 or 3
3 to select a number from
01 to 99.
5. Press
5
5 to stop JLIP ID NO. flashing
and return to the recording menu, or
press MENU to exit both menus.
JLIP Connector
To Turn the Tally Light ON or OFF
1. Follow steps 1-4 on the previous page.
2. Press
4
4 or 3
3 to highlight Tally.
3. Press
6
6 to start Tally flashing.
BATT. RELEASE
AUDIO
RF
DC OUT
VIDEO
LE
N
S
C
O
V
E
R
+
–
CAMERA
VCR
POWER
OFF
sp•EP
TRACKING
UNTER R/M
W.BAL.
PLAY/PAUSE
STOP
FF
+
REW
JLIP
Tally Light