RCA ProV800C - Manual (Page 61)

59
Recording
13.If necessary, adjust the exposure
control, focus, and stabilizer before
step 14.
14.Press MENU to exit the menu. and
the amount of recording time, and
and the amount of interval time appear
in the viewfinder or on the LCD
monitor.
5min
1/4S
PAUSE
15.Press the thumb trigger to start
recording.
Notes: The camcorder will start and stop
recording the selected amount of time.
If the tally light is turned on, it flashes
with the flash speed increasing five
seconds before recording begins.
16.Turn off the interval and recording
time when you are finished by
selecting Interval Timer OFF and Rec
Time OFF in the Sub Menu.
Note: Fades and wipes do not operate during
time-lapse recording.
6. Press
6 6 to display the Sub Menu.
Tally
Interval Timer
Rec Time OFF
JLIP ID NO. 0 7
ON
OFF
15S
30S
1min
5min
1/4S
1/2S
1S
5S
OFF
OFF
7. Press
4 4 or 3 3 to highlight Rec Time.
8. Press
6 6 to start Rec Time flashing.
9. Press
4 4 or 3 3 to select the amount of
time you want the camcorder to
record.
• Select 1/4S, 1/2S, 1S, or 5S to have
the camcorder record for 1/4
second, 1/2 second, one second, or
five seconds.
• Select OFF to turn off the
recording time.
10.Press
3 3 to highlight Interval Timer.
11.Press
6 6 to start Interval Timer
flashing.
12.Press
4 4 or 3 3 to select the amount of
time you want between recordings.
• Select 15S, 30S, 1min, or 5min to
set the intervals between recording
to 15 seconds, 30 seconds, one
minute, or five minutes.
• Select OFF to turn off the Interval
Timer.