User tools, Accessing the user tools, User tools (copy features) – Ricoh 450 User Manual
Page 161: Accessing the user tools (copy features)
145
4. USER TOOLS (COPY
FEATURES)
ACCESSING THE USER TOOLS (COPY
FEATURES)
This section is for the key operators in
change of this machine. You can
change or set the machine's default
settings.
Preparation
After using the user tools, be sure
to exit from user tools.
Reference
Regarding about the user tools for
system setting, see “Accessing The
User Tools (System Settings)” in
the System Settings.
Regarding the user tools for the fax
mode, see each Operating Instruc-
tions.
A
Press the
{
User Tools/Counter
} key.
B
Enter
{
2
} with the {
Number
} key.
C
Enter the number of the desired
User Tools menu with the
{
Num-
ber
} keys.
Note
❒ To return to the previous menu,
press the
[Menu]
key.
D
Search for the desired setting
with the
[
↓↓↓↓
Next]
key. Enter its
number with the
{
Number
} keys.
Note
❒
[
↓↓↓↓
Next]
: Press to go to the next
page.
❒
[
↑↑↑↑
Prev.]
: Press to go back to the
previous page.
Reference
See
⇒
P.145 “USER TOOLS
(COPY FEATURES)”.
E
Change the settings by following
the instructions on the panel dis-
play. Then, press the
[OK]
key.
Reference
See
⇒
P.150 “Settings You Can
Change With The User Tools”.
Note
❒
[OK]
key: Press to set the new
settings and return to the previ-
ous menu.
2
2
2
1
1
2
2
1
1 2
2 3
3
Enhanced
ND2L0103