Ricoh 450 - Manual (Page 80)

COPYING
64
2
you for your user codes after the
operation switch is on or the Auto
Reset comes into effect.
❒ To prevent others from making
copies using your user code, press
the
{
Clear Modes/Energy Saver
} and
{
Clear/Stop
} keys simultaneously
after copying.
Reference
For setting user codes, see
⇒
P.154
“1. General Features 4 /
4
”.
Auto Start—Entering Copy
Job Settings During The
Warm-up Period
If you press the
{
Start
} key during the
warm-up period, the
{
Start
} key will
blink, and your copies will be made
as soon as warm-up finishes.
A
Make any adjustments to copy
settings during the warm-up peri-
od.
B
Set your originals.
C
Press the { Start } key.
The { Start } key indicator alternate-
ly flashes red and green.
Note
❒ To cancel Auto Start, press the
{
Clear/Stop
} key.
Original Beeper
The beeper sounds and an error mes-
sage is displayed when you leave
your originals on the exposure glass
for about two seconds after copying.
Note
❒ To cancel this function, see “06.
Original Beeper” in
⇒
P.152 “1.
General Features 2 /
4
”.