Ricoh 450 - Manual (Page 23)

7
OPTIONS
Type 1
1. 1000-sheet finisher
Sorts, stacks, and staples copies.
2. External tray
If you selected this as the output tray,
copied paper is delivered here face
down. See “15. Output Tray” in the Sys-
tem Settings.
3. Platen cover
Lower this cover over originals for copy-
ing.
4. Document feeder (ADF)
Insert a stack of originals here.
They will be fed automatically.
5. Internal tray 2 (1 bin tray)
If you selected this as the output tray,
copied paper is delivered here face
down. See “15. Output Tray” in the Sys-
tem Settings.
6. Bridge unit
Relays copies to the external tray or fin-
isher.
7. Paper tray unit
Consists of two paper trays.
8. Large Capacity Tray (LCT)
Holds 1,500 sheets of paper.
9. Bypass tray
Use to copy onto OHP transparencies,
adhesive labels, translucent paper, post
cards, and non-standard size paper. See
⇒
P.55 “Copying From The Bypass Tray”.
10. Duplex unit
Use to make two-sided copies.
Other options:
• Interchange unit
• 8 MB copier memory unit (Electric
sort kit)
• Copier hard disk (Image enhance kit)
ND0P01EE
1 2 3 4 5
10 9 8 7 6