Renesas Pod Probe for 7906 Group MCUs M37906T-PRB - Manual (Page 20)

( 18 / 40 )
2.4 System Configuration
Figure 2.1 System configuration
Products (2) and (3) shown in Figure 2.1 are included with this product. Get (1) in Figure 2.1
separately.
(1) Emulation pod main unit (M37900T2-RPD-E)
This is an emulation pod common for 7900 Series MCUs. By replacing the pod probe on the tip
of the emulation pod, it will support future 7900 Series MCUs (option).
(2) Pod probe (M37906T-PRB)
This pod probe is equipped with the emulator MCU, M37906FCCWP.
(3) Pitch converter board for 42-pin 0.8mm-pitch SSOP (SSOP42B-450)
Board for connecting the pod probe to the socket for 42-pin 0.8mm-pitch SSOP on the target
system.
For details on the connection, refer to "3.4 Connecting the Target System" (page 24).