Radio Shack Cordless Room Monitor - Manual (Page 11)

11 Preparation
RadioShack’s involvement in this program is part of the compa-
ny’s commitment to preserving our environment and conserving
our natural resources.
MOUNTING THE TRANSMITTER ON A WALL
With the supplied hook, you can mount
the transmitter on a wall. Use two
1 / 8 -inch
flat-head screws (not supplied) to attach
the hook to the wall, then hang the trans-
mitter over the hook.
MOUNTING THE CHARGER ON A WALL
You can mount the charger on
a wall using the supplied
mounting bracket. Use two
1 / 8 -
inch flat-head screws (not sup-
plied) to attach the bracket to
the wall. Then slide the charger
over the mounting bracket and
pull down the charger until it
snaps into place.s
To remove the charger from the mounting bracket, press and
hold the tab on the bottom of the bracket to unlock the latch,
then slide the charger up.
Tab
43-489rc.fm Page 11 Tuesday, October 3, 2000 10:12 AM