Connecting and charging the receiver’s battery – Radio Shack Cordless Room Monitor User Manual

Page 8

Advertising
background image

8

Preparation

Warning: Dispose of old batteries promptly and properly. Do
not burn or bury them.

Cautions:

• Use only fresh batteries of the required size and type.

• Do not mix old and new batteries, different types of batter-

ies (standard, alkaline, or rechargeable), or rechargeable
batteries of different capacities.

• If you do not plan to use your transmitter for a week or

more, or you plan to use only AC power, remove the batter-
ies. Batteries might leak chemicals that can damage the
transmitter’s electronic circuits.

Notes:

• If the range decreases or the POWER indicator does not

light when you turn on the transmitter, replace the batteries.

• When you connect the AC adapter, the batteries are auto-

matically disconnected.

CONNECTING AND CHARGING THE
RECEIVER’S BATTERY

The receiver comes with a rechargeable 3.6V nickel- cadmium
battery pack installed in the battery compartment. Before using
it, you must connect the battery, then charge it for about 10
hours.

Caution: Do not place the receiver onto the charger before you
connect the AC adapter to the charger.

43-489rc.fm Page 8 Tuesday, October 3, 2000 10:12 AM

Advertising