Rangemaster Dishwasher RDW459FI/SF - Manual (Page 15)

13
Spray arms
Limescale and remnants of food in the washing water can
block the nozzles in the spray arms and the arm mountings.
Inspect the nozzles in the spray arms for blocked holes due to
remnants of food.
If necessary, pull the lower arm (Fig.3-5) upwards and lift it
off. Unscrew the upper spray arm (Fig.3-6).
Clean both spray arms under running water.
n n
Refit the spray arms. Make sure that the lower arm
has locked into place and the upper one is screwed
tight.
Solvents or Abrasive Cleaning Products
To clean the exterior and rubber parts of the dishwasher, do
not use solvents or abrasive cleaning products. Rather, use
only a cloth and warm soapy water.
To remove spots or stains from the surface of the interior, use
a cloth dampened with water and a little white vinegar or a
cleaning product made specifically for dishwashers.
Moving the Appliance
If the appliance must be moved, try to keep it in a vertical
position. If absolutely necessary, it can be positioned on its
back.
Seals
One of the factors that cause odours to form in the
dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this from
occurring.
When You Go on Holiday
When you go on holiday, it is recommended that you run a
wash cycle with the dishwasher empty and isolate from the
mains. Turn off the water supply and leave the door of the
appliance slightly ajar. This will help the seals last longer and
prevent odours from forming within the appliance.
ArtNo.800-0504 - Cleaning the upper spray arm
ArtNo.800-0505 - Cleaning the lower spray arm
Fig.3-5
Fig.3-6