Raymarine 300 - Manual (Page 42)

3-14 Raynav 300 GPS Plotter
bearing and range, date, time and, if placed at vessel, depth and tem-
perature (if available) are shown.
2. Press the MAKE NEW WAYPOINT soft key; the New Waypoint screen is
displayed, together with its associated soft keys, see Figure 3-19.
Figure 3-19: New Waypoint Screen
3. The new waypoint is listed at the vessel’s current position or, if not
available, the cursor’s current position; The waypoint is named with
the next available number.
If required, edit the waypoint using the LAT/LONG, SYMBOL and
NAME soft keys. Operation of these soft keys is identical to the SYM-
BOL, NAME and POSITION soft keys described in Editing Waypoint
Details on page 3-17.
4. When editing is complete, press ENTER to place the waypoint in the
waypoint list (or CLEAR to abort the operation).
5. When complete, press CLEAR as required to exit to the default dis-
play.
➤
To place a waypoint as Loran TDs:
1. Press MARK, followed by the WAYPOINT LIST soft key; the Waypoint
List and associated soft keys are displayed as shown previously
(Figure 3-18):
2. Press the MAKE NEW WAYPOINT followed by the LORAN TDs soft key;
the WPT POSITION (LORAN TDs) screen is displayed, together with it’s
associated soft keys, see Figure 3-20.
SYMBOL NAME LAT/LONG LORAN TDs
SYMBOL NAME
WPT 005
N 50°50^000
W 001°06^000W
POSITION
BRG 124° m RNG 12.6 nm
NEW WAYPOINT
D5518-1