Raymarine 300 - Manual (Page 50)

3-22 Raynav 300 GPS Plotter
➤
To edit an item in a list using the Navigator Keypad:
1. If necessary, use the right and left arrow keys to move the cursor to the
desired character position.
2. Press an alphanumeric key until the desired character is displayed.
Each time you press one of these keys in succession, the next charac-
ter on that key is input.
or
1. Use the up and down arrow keys to scroll through the list of alpha,
numericand special characters until the desired character is displayed
(just as you would with the trackpad). Note that you must use this
method to input special characters; they are not available using the
alphanumeric keys.
Use the del key to insert a space, if required.
2. Use the arrow keys and alphanumeric keys to input the remainder of
the characters required to complete the editing.
3. When done, press the ins key to enter your changes.