ROUTE 66 Mobile 7 User Manual

Page 3

Advertising
background image

ROUTE 66 Mobile 7

3

Introduction

"ROUTE 66 Mobile 7" turns your Symbian smart phone all at a sudden into a powerful navigation system up
to house number accuracy! After a short plug & play installation, turn-by-turn voice instructions and on-
screen directions will guide you from your current position to the destination that you have entered. You can
add any number of intermediate waypoints to your route that you may have selected from your personal
contacts, your favourites and your most recent destinations as well. If you miss a turn, then "ROUTE 66
Mobile 7" immediately recalculates your route. You can automatically download up-to-date traffic information
from the ROUTE 66 internet site via a GPRS* connection to your smart phone, even when you are on the
road. This non-stop FREE service helps you via dynamic routing to avoid traffic jams, road works or
accidents (in A/B/CH/D/DK/E/F/GB/I/N/NL/S).

What's more? You can display the map in night colours to keep a clear view on the road even when you are
driving at night or in bird view to display the map as you would see it if you could fly like a bird. In addition to
all this, you can navigate to any of the many points-of-interest like hotels, restaurants and petrol stations.
You can even dial them directly to make for example a hotel reservation or inquiry before going there!
In summary, "ROUTE 66 Mobile 7" is a must for everyone looking for an affordable, flexible and powerful
navigation system!
* please contact your network operator for further information about GPRS and roaming

Smart phone specifications

Your Symbian smart phone must have the following specifications:

A free slot for an extra memory card

Bluetooth wireless technology

Symbian S60 platform v2.0 or higher

Optional: a GPRS connection to download up-to-date traffic information

For an up-to-date list of compatible smart phones, please consult our website at http://www.66.com

Not compatible with Symbian UIQ and Microsoft Mobile

Bluetooth GPS receiver

Features

The Bluetooth GPS receiver has the following features:

Chipset: SiRF StarIII

High sensitivity 20 channels receiver

Position accuracy: 10 meters

Cold/Warm/Hot time-to-first-fix: 45/38/8 seconds

Reacquisition time: 100 ms

Supports NMEA-0183 and SiRF protocol

Compatible with Bluetooth devices with Serial Port Profile (SPP)

Battery life: > 8 hours

Dimensions: 70 x 41 x 25 mm

Weight: 62 grams

Connection: Bluetooth

LED display

Power switch

RF MCX connector for external GPS antenna

Manufacturer: RoyalTek Company Ltd.

LED Display

The LED display consists of 3 LEDs that have the following meaning:

Battery Status LED (leftmost red/yellow LED)

o

Red: the battery power is low, charging is required immediately.

o

Yellow: the battery is being charged.

o

Off: the battery is fully charged, the battery has adequate power.

GPS Status LED (green LED in the middle)

Advertising