ROUTE 66 Mobile 7 - Manual (Page 4)

ROUTE 66 Mobile 7
4
o
Flashing green light: the GPS receiver is switched on and the GPS position is fixed.
o
Steady green light: the GPS receiver is switched on but the GPS position is not yet fixed.
•
Bluetooth Status LED (rightmost blue LED)
o
Flashing blue light: the Bluetooth connection is established.
Getting started
To start using “ROUTE 66 Mobile 7”, you have to carry out the following steps:
•
Step 1: Charge the battery of the Bluetooth GPS receiver
1. Before you can use the Bluetooth GPS receiver, the battery has to be fully charged. In order
to do so, you have to connect the charger cable to the power jack of the GPS receiver and to
plug it into the cigarette lighter outlet of your car. While the battery is being charged, the
Battery Status LED will show a yellow light. Note that the Bluetooth GPS receiver standard
comes with a fully charged battery.
2. As soon as the battery is fully charged, the Battery Status LED will turn off. Now you can
unplug the charger cable from the GPS receiver and from the cigarette lighter outlet of your
car.
•
Step 2: Switch on the Bluetooth GPS receiver and wait for a fixed GPS position
1. After you have switched on the Bluetooth GPS receiver, the GPS Status LED will initially
show a steady green light to indicate that the GPS position has not been fixed yet.
2. After the position has been fixed, the GPS Status LED will change into a flashing green light.
Now the Bluetooth GPS receiver is ready to be connected to your smart phone.
•
Step 3: Insert the memory card into your smart phone and launch “ROUTE 66 Mobile 7”
1. Insert the memory card into your smart phone. See the documentation of your smart phone
for how to insert the memory card.
2. Switch on your smart phone and launch “ROUTE 66 Mobile 7”.
• Step 4: Activate “ROUTE 66 Mobile 7”
1. If you are launching “ROUTE 66 Mobile 7” for the first time, you are automatically requested
to activate the product. See below how to activate your product.
•
Step 5: Start navigating
1. Select Start from the Options menu, enter a search text that contains information about the
address where you want to go, press Options and select Search, select your destination
from the list of search results, press Options and select Navigate to.
2. As soon as you select Navigate to, the smart phone will automatically carry out a search for
Bluetooth devices in your neighbourhood. Select the Bluetooth GPS receiver and set it as
the Default GPS receiver.
3. After the Bluetooth connection between the smart phone and the Bluetooth GPS receiver
has been established, the Bluetooth Status LED will show a flashing blue light and you can
start navigating.
Product activation
Before you can start using "ROUTE 66 Mobile 7”, you have to activate the product first. In order to do this,
you should go to the Applications view, push the joystick up or down and left or right to select “Mobile 7”,
next press Options and select Open.
This opens the Product activation view.