ROUTE 66 Mobile 7 - Manual (Page 7)

ROUTE 66 Mobile 7
7
Press OK to skip the Disclaimer when launching “ROUTE 66 Mobile 7” again. After you have done
so you will see the ROUTE 66 splash screen and you will hear the text “Welcome to ROUTE 66!” at
the same time.
This completes the product activation.
Important: please note that the following restrictions apply to the use of the Product key:
• You can use the same Product key on the same smart phone using different SIM cards as many
times as you want.
• You can use the same Product key on a second smart phone using different SIM cards only 1 week
after the first activation.
•
You can use the same Product key on a third smart phone using different SIM cards only 1 month
after the first activation.
•
It is strongly recommended not to delete the SMS containing the Activation key so that you can use
the same Activation key later again.
Installing other geographic map(s) and voice instructions on the Memory Card
You can (re)install the navigation software, geographic map(s) and voice instructions from the enclosed
back-up CD(s) onto your memory card.
When you use the installation CD(s) for the first time, you first have to manually format your memory card
(see Formatting your Memory Card below for how to do this). If you have completed an earlier installation
using the CD(s), you can immediately proceed with the steps below.
1. Connect the memory card reader & writer to the USB port of your computer, then insert the memory
card into the memory card reader & writer and the CD into the CD drive.
2. The installation should start automatically. If it does not start, please run setup.exe from the CD(s).
3. Select the language you want the installation to be performed in, e.g., "English", and click Next.
4. Click Next to continue.
5. Select the drive where the files should be installed. Click Next to continue.
6. Read the license agreement carefully, select the first option and click Next to continue.
If geographic map(s) and voice instructions are already installed on your memory card, choose the
relevant option and click Next to continue:
Modify to select new components to install or the components to remove (see steps 7 to 10
below).
Repair to reinstall the components that were previously installed (see steps 7 to 10 below).
Remove to remove the installed components (see step 10 below).
7. Select the language of the voice instructions (e.g., "English") you want to install onto the memory
card. Note: The default language is identical to the Setup Language. Click Next to continue.