Panel and din rail mounting dimensions, Power supply wiring and grounding, 3 panel and din rail mounting dimensions – RuggedCom RUGGEDBACKBONE RX1501 User Manual
Page 23: 2 power supply wiring and grounding
RuggedBackbone™ RX1501
Installation Guide
Chapter 3
Installation
Panel and DIN Rail Mounting Dimensions
17
Section 3.1.3
Panel and DIN Rail Mounting Dimensions
Figure 37: Panel and DIN Rail Mounting Dimensions
Section 3.2
Power Supply Wiring and Grounding
The RX1501 supports a single power supply, power module 1 (PM1). Power connections are located on the PM1
module face plate. An optional chassis ground connection is located on the front panel as shown in
RX1501 products can be equipped with either a Phillips Screw Terminal Block or a Phoenix Plug Terminal
Block. The Phillips Screw Terminal Block has Phillips screws with compression plates, allowing either bare wire
connections or crimped terminal lugs. We recommend the use of #6 size ring lugs to ensure secure, reliable