RCA 25205 - Manual (Page 63)

15
LCD Backlight
1. Press the MENU button.
2. Use the 5 or 6 button to scroll to DISPLAY SETTING.
3. Press Sel/Save.
4. Use the 5 or 6 button to scroll to LCD BACKLIGHT.
5. Press Sel/Save button.
6. Use the 5 or 6 button to select AUTOMATIC or ALWAYS ON.
NOTE: If you select the option AUTOMATIC, the LCD will be turned on during incoming call or when a
button is pressed. If you select the option ALWAYS ON, the LCD backlight will become always turned on.
7. Press Sel/Save to save. To start over, press EXIT to return to the DISPLAY SETTING menu.
Ring Tone
The ringers for all lines may be set independent of one another.
1. Press the MENU button.
2. Use the 5 or 6 button to scroll to SOUND SETTING.
3. Press Sel/Save button.
4. Use the 5 or 6 button to scroll to RING TONE.
5. Press Sel/Save button.
6. Press 3 or 4 to select L1 or L2 for ring tone change.
7. Then, use the 5 or 6 button to scroll to the tone selection. There are 7 ring tones
from which you can select from.
8. Press Sel/Save to save. To start over, press EXIT to return to the SOUND SETTING
submenu and repeat step 5.
Connections and Setup