RCA 25205 - Manual (Page 80)

2
Digital Answering System
This unit incorporates a digital answering system with a total voice recording capacity of
approximately 40 minutes. The messages are saved in non-volatile memory and will not be
lost even in the event of total power outage.
Once the recording capacity of the unit is reached or a line has its maximum number of
58 messages, the unit will show “VM MEMORY FULL” on the screen, and cannot record
message for this mailbox.
Unit will announce a busy voice message to caller if system is busy and unable to serve
the caller. Furthermore, this unit is able to answer and record caller messages while you
are talking on the other line.
Answering System Indicator
Check the Answer L1 and L2 button/indicator for answering system status.
Off: Answering system is off.
On: Answering system is on.
Flashing: New voice message was received.
Answering System On / Off Status Check
Briefly press the Answer L1 or L2 button, it displays the answering status on LCD. For
example, L2:ANSWER OFF.
To change status; press and hold the Answer L1. Unit will display and announce the new
status of the answering system.
Playback Messages
1. Press Play/Stop button.
2. The voice messages status is displayed. Use the 3 and 4 to scroll to L1 or L2.
3. Press Sel/Save to start playback.
-OR-
The Answer button flashes when there are new messages in the mailbox. Press the
corresponding Answer button to play messages.
4. During playback, press 4 to skip to the next message.
Caller ID