Connections and setup – RCA 25205 User Manual
Page 67
1
ANNOUNCE
It is empty when powered up for the first time. You have to record it
ONLY:
before
using it for answering. When ANNOUNCE ONLY is
selected under CONFIG OGA, the unit will use this OGA as an
answering announcement and will not record incoming message.
WORK HOURS:
It is empty when powered up for the first time. You have to record it
before
using it for answering. When TIMED is selected under CONFIG
OGA, the unit uses WORK HOURS OGA and AFTER HOURS OGA in
accordance to the time that was programmed Work and After hours.
AFTER HOURS:
It is empty when powered up for the first time. You have to record it
before
using it for answering. When TIMED is selected under CONFIG
OGA, unit uses WORK HOURS OGA and AFTER HOURS OGA in
accordance to the time that was programmed Work and After hours.
Out-Going Announcement Playback
1. Press the MENU button.
2
.
Use the 5 or 6 to scroll to ANSWERING SYS.
3. Press Sel/Save.
4.
Use the 5 or 6 to scroll to OGA PLAYBACK.
5. Press Sel/Save.
6. Use the | or } to scroll to L1 or L2.
7. Then use the 5 or 6 to scroll to desired OGA to be played.
DEFAULT
PERSONAL
ANNOUNCE ONLY
WORK HOURS
AFTER HOURS
8. Press Sel/Save to start playback.
9. When playback finishes, it will stop automatically. Or press EXIT to stop playback.
When playback stops, it returns to OGA PLAY menu.
Connections and Setup