Roland SC-545EX User Manual
Page 34
32
Chapter 1: Getting Started
1-5 Switching On the Power for the First Time
Step 2 : Match the Machine to the Environment Where Installed
The machine performs automatic adjustment to optimize its state to the environment where it is used (temperature and
humidity).
Performing automatic adjustment reduces misalignment in the scanning direction (the direction of movement of the
carriage) during printing and cutting.
1
Press the [MENU] key, and press the [ ] key
to make the following screen appear on the dis-
play.
2
Pull back the loading lever and press the [EN-
TER] key.
The print-head carriage moves and the printing length in
the carriage-movement direction is adjusted.
3
When this screen appears, press the [ENTER]
key.
Press the [
] key to go back to the original
screen.
4
Flip the loading lever to the rear.
MENU
ENV. MATCH
ENV. MACH
SETUP COMPLETED