Roland SC-545EX - Manual (Page 81)

79 Chapter 4: A Wide Variety of Operations
4-6 Making Corrections for Printing and Cutting
6 Use the [ ] key to choose [FEED SETTING].
7 Press the [ ] key to make the following screen
appear on the display.
8 Enter the correction value read in step 5.
Select the correction value with the [ ] [ ]
key, and press the [ENTER] key.
9 Repeat steps 6 through 8 and enter the correc-
tion value of [SCAN SETTING].
FEED SETTING
0.0 mm 0.0 mm
PRINT - CUT ADJ.
FEED SETTING