Radio Shack 65-790 - Manual (Page 20)

20
SCHEDULE ALARMS
Schedule alarms help you stay in control
of your busy schedule by reminding you
of meetings and other important events.
For each schedule alarm, you can enter
an alarm message of up to 97 charac-
ters.
At the set alarm time, the alarm sounds
for 30 seconds and your stored mes-
sage appears. If the organizer is off at
the alarm time, the organizer turns on,
sounds the alarm, and displays the
alarm message.
To silence the alarm, press any key.
Notes:
• Because pressing any key will turn
off the alarm, the alarm might not
sound if you are entering informa-
tion at the precise time the alarm
sounds.
• If the alarm sounds and the alarm
message appears while you are
entering information, the information
you are entering might not be
stored.
ENTERING A SCHEDULE
ALARM RECORD
1. Press SCHED . SCHEDULE , a num-
ber and % FREE (showing the avail-
able memory), and a number and
ITEMS (showing the number of
stored items) appear.
2. Press ENTER . The first digit of the
month flashes.
3. Enter the schedule month then
press . The first digit of the day
flashes.
4. Repeat Step 3 to enter the schedule
day and year. The schedule start
time’s hour flashes.
5. Enter the schedule start hour then
press . The minute flashes.
6. Use the number keys to enter the
schedule start minute.
7. In the 12-hour format, press AM/PM
(X) to select the correct AM or PM
hour. Then press to select the
schedule end time hour or to
select the schedule end time
minute. The schedule end time’s
hour or minute flashes.
Note: If you make a mistake, press
or to move to the digit that you
want to change. Then type the cor-
rect digit.
8. Repeat Steps 5–7 to set the sched-
ule end time. Then press ENTER to
set the alarm time after inputting the
alarm time and repeatedly press
/ (J) until ON appears (to turn the
alarm on) or OFF appears (to turn
the alarm off).
9. Press ENTER . MESSAGE? appears.
10. Enter the alarm message.
• To enter a space, press SPACE .
• To select a symbol (@, / , & , \ , : ,
# , ~ , - , or ‘ ), repeatedly press
SYM until the symbol appears.
Then press to select the sym-
bol.
65-790.fm Page 20 Monday, November 29, 1999 3:59 PM