Radio Shack 65-790 - Manual (Page 8)

8
Caution: You must use a Class
2 power source that supplies 9
volts DC and delivers at least
500 mA. Its center tip must be
set to positive and its plug must fit the
organizer's 9V DC jack. The supplied
adapter meets these specifications. Us-
ing an adapter that does not meet these
specifications could damage the orga-
nizer or the adapter.
INITIALIZING THE
ORGANIZER
Initialize your organizer before you use it
the first time after connecting it to AC
power, or when you want to delete all
stored records, alarms, and the pass-
word.
Important: This procedure deletes all
stored information!
1. Use a pointed object such as a
straightened paper clip to press
RESET on the bottom of your orga-
nizer. CLEAR ALL DATA? (Y/N)
appears.
2. To delete all stored records, alarms,
and the password, press Y . Or,
press N to cancel.
CONNECTING THE
ORGANIZER TO THE
PHONE LINE
The organizer connects to any modular
phone line jack and your phone. If your
telephone or line does not have modular
jacks, you can purchase the necessary
adapters at your local RadioShack
store. Or, you can have your local tele-
phone company update your wiring.
Notes:
• The USOC number of the jack to be
installed is RJ11C (or RJ11W for a
wall plate jack).
• Your organizer dials using standard
touch tones. If you do not subscribe
to touch-tone service, you must
order this service from your local
telephone company.
Follow these steps to connect the orga-
nizer to the phone line.
1. Disconnect the modular phone line
cord (running from the wall jack)
from your telephone and plug it into
the organizer’s
TO LINE jack.
2. Plug one end of the supplied modu-
lar telephone cord into the orga-
nizer’s
TO PHONE jack.
3. Plug the other end of the cord into
the phone’s jack.
!
65-790.fm Page 8 Monday, November 29, 1999 3:59 PM